Jump to content
yellows

Baffle Heights

Recommended Posts

Heres the last sump i did. Except the most left baffle didnt go it. and the short middle baffle is that size because i used and existing bit of glas from the sump. If it was up to me that baffle would have be 50 lower than the previous drop

post-10343-14711632964769_thumb.jpg

Link to comment
Share on other sites

what are you using those middle chambers for

if not for any extra media i cant see the need for the extra baffels

Apparently I haven't got enough bio media the way it is now and need to make room for a heater or 2 at 55cms so was going to set it up like thatpost-7637-14711632965_thumb.jpg

Link to comment
Share on other sites

i would add another baffle to that middle chamber you want the water to move through the chambers. not sure if it would circulate much in that middle one

Also whats easier to clean? jap mat or dacron? i have dacron first in mine

Link to comment
Share on other sites

Yes everyone I have the Dacron on top now then Jap mat then the Green Fine sponge so the picture In my original post would be the best and are 250mm baffles to high as I want to hook this a to 3 x 4 x 1.5 x 1.5 as it is only hooked up to my 5 x 2 x 2 at the moment and put the heaters in there as well

Link to comment
Share on other sites



×
×
  • Create New...