Lictoga Posted February 26, 2015 Report Share Posted February 26, 2015 (edited) Dose anyone know where to get a O ring for a co2 reg both the plastic one and the tiny rubber one that goes between the cylinder adapter and the regulator nipple? Edited February 26, 2015 by Lictoga Link to comment Share on other sites More sharing options...
Lictoga Posted February 26, 2015 Author Report Share Posted February 26, 2015 Also can thread tape be used on this joint Link to comment Share on other sites More sharing options...
zorba Posted February 26, 2015 Report Share Posted February 26, 2015 If BOC sell parts maybe Otherwise maybe a plumbing outlet like Reece Link to comment Share on other sites More sharing options...
Lictoga Posted February 26, 2015 Author Report Share Posted February 26, 2015 If BOC sell parts maybeOtherwise maybe a plumbing outlet like Reece Thanks I forgot about plumbing stores Link to comment Share on other sites More sharing options...
Piet Posted March 1, 2015 Report Share Posted March 1, 2015 I just had this problem yesterday - thread/PTFE/plumber's tape did nothing to fix it (at least for my cylinder/reg) and I think it isn't recommended with very high pressure applications. You can also usually get O rings at hardware stores. I got a mixed set of rubber O rings from Bunnings for a few bucks, but they didn't seem to have the nylon or plastic washers. I imagine that any home brew shop or gas stores that deal with high pressure gas should carry those. Link to comment Share on other sites More sharing options...
n5750547 Posted March 1, 2015 Report Share Posted March 1, 2015 I get my co2 filled at a dive shop in Morningside and they have replaced the o - rings for free. Edit: it's called Ozaquatec Link to comment Share on other sites More sharing options...
Lictoga Posted March 1, 2015 Author Report Share Posted March 1, 2015 Thanks guys no longer needed. Link to comment Share on other sites More sharing options...
