Jump to content
yellows

Plumbing a Rack Questions

Recommended Posts

Dictated by the return pump, I would go 25mm, what size is the pump, what turnover?

Will be getting either a 4000 or 5000 L/PH as I will be hooking it up to a 5 x 2 x 2 and 3 x 4 x 1.5 x 1.5 tanks and can only use 15mm or 20mm pipe as gap between the rail for holding the lids and the back of the tank is 25mm

Link to comment
Share on other sites

Yeah I have used 20mm all round my big setup, but I used second hand 25mm piping for sump return & get much better flow :) I would go 25mm. and your on the right track with 13mm outlets. Run all you your tank drains into 90mm man. it makes you life so much easier ( and cheaper) :)

Link to comment
Share on other sites

Will be getting either a 4000 or 5000 L/PH as I will be hooking it up to a 5 x 2 x 2 and 3 x 4 x 1.5 x 1.5 tanks and can only use 15mm or 20mm pipe as gap between the rail for holding the lids and the back of the tank is 25mm

Thanks [MENTION=3100]Craigo[/MENTION] I can only go 15 or 20 mm mate so I can have my lids on the tanks

Link to comment
Share on other sites



×
×
  • Create New...