Jump to content

Archived

This topic is now archived and is closed to further replies.

Dane

Led light on Bracket

Recommended Posts

I have for sale 2 x 10w led floodlights with brackets and lead ready to go. Was going to use these on my tank but might try something else.

Brackets are made from 20mm tube and the cable runs down inside the tube (no zip ties). The light is attached to the bracket with two stainless steel screws. There is approx 1800mm of black cable hanging out of the bottom with a plug in the bottom of tube so the cable catch on the inside of the tube. The bracket fixing plate has been welded on and is approx 205 x 70mm. It has 6 x 6mm holes ready for attaching to cabinet. The overall height is approx 850mm, so there is approx 645 of tube after the plate. From the back of the bracket to the centre of the floodlight is approx 325mm. The floodlight swivels on its bracket. These fittings are ready to screw on and turn on.

$90 each or $160 for the pair.

PM for anymore info.

Thanks Dane

light3.jpg

light2.jpg

light1.jpg

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.


×
×
  • Create New...