Jump to content

Recommended Posts

starting up a new tank that will be my shrimp tank and will need do divide the tank. just wander what the best divider is. not looking to devide with glass..so looking for a fine kind of mesh to small for the little shrimplets to find their way through. open to all ideas

thanks:)

Link to comment
Share on other sites

i know you said you wern't to keen on glass but i've made lots of semi-permanent dividers by cutting 4 lengths of glass to fit in the tank and then siliconing flyscreen to them (can do more than one layer staggered to make the holes smaller) and they have worked great, and only take around 5min to take out with a razor blade - have re-used some aswell.

Link to comment
Share on other sites

usually easy enough to attach plastic canvas, the stuff people use for needle work, to something like eggcrate to give it structural strength.

I just use silicon to attach.

You can use those plastic folder strips to, and then just slot panels of the plastic canvas in.

or

you could use a nice big block of foam

that works excellent

doubles as a filter

and is easy to put air rises over

Link to comment
Share on other sites



×
×
  • Create New...