Jump to content

Recommended Posts

Does anyone know where I can get leveling feet from for my stands or an idea that might work besides leveling feet.

I was thinking of buying a nut just bigger than the rhs measurement and welding this to the bottom then a bolt to fit in but not quite sure if this will work.

Link to comment
Share on other sites

it should work

i welded a flat plate to the bottom of the leg with a hole through it i then welded an m16 nut high tensile and used m16 high tensile bolts. High tensile nuts and bolts are dearer but are rated at approx 1 tonne per bolt. My rack was holding 3.2 tonne of water and glass with six legs and six of the m16 levelling bolts. High tensile bolts should have 8.8 stamped on their heads.

HTH

Link to comment
Share on other sites

Ok went and bought nuts and bolts today starting stands hopefully tomorrow or manday at the lates funfunfun

Should have a great tan bytime I'm finished. So at the auction in a couple of weeks I will be either very red or very brown lol

Link to comment
Share on other sites



×
×
  • Create New...