Jump to content
jimbozed

Tank Dividers

Recommended Posts

TANK DIVIDERS

Here is a brief description of the dividers I put in my 6’x18”x18” tank.

These must be made and fitted to tank while empty and dry.

I made the dividers out of 6mm glass, two panels, one from the front and one from the back.

Each panel has a slot (made from strips of glass), on the inner edge (FIG 1.).

The panels are then siliconed into place opposite each other and left for at least 36 hrs before filling tank with water.

Fig 1.

endofglassdividerSmall.jpg

I used gutter guard for the removable section and made the panels to suit. (fIG 2.)

Fig 2,

topview.jpg

Plastic mesh can be removed if needed.

Fig 3.

tankendviewSmall.jpg

system016Medium-1.jpg

Remember, only use “acetic cure” silicone, for aquariums..

Cheers George

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.


×
×
  • Create New...